When it comes to swimming pool cleanliness, weekly maintenance is the key. The majority of bacteria in swimming pools come from people and other agents such as pets. Regular weekly maintenance will protect you from nose, eye, and skin irritation. Follow the tips in this article to keep your swimming pool clean. In addition, you should clean your automatic cleaner bag, water-line, and gutter tiles. These are just a few of the tasks to perform during weekly pool maintenance.
Cleaning the automatic cleaner bag
The automatic cleaner bag is usually removed from the automatic cleaner while performing weekly pool maintenance. You can clean it using a brush or vacuum, but it is easier to remove the bag manually. Most automatic cleaners have a telescopic pole attached to them, making them easy to handle. You can also use a leaf net to collect debris above and below the water’s surface. You should remember to turn off the power supply before removing the bag, as this will cause the vacuum to spray water when it is not fully submerged.
Cleaning the inline screen
As part of your weekly pool maintenance, you need to clean the inline screen of your pool filter. It collects debris and should be cleaned regularly. You also need to empty the filter bag as needed. Be sure to clean debris that collects on your deck or coping as this can enter your pool. Check the water level, and inspect safety features. Clean all of these items to ensure your pool is in good condition and ready to enjoy.
Cleaning the water-line
One of the most important parts of pool maintenance is cleaning the water-line. As you swim, water-line residue will attach to street clothes and other debris, triggering algae growth and making your pool look dirty. Brushing the walls and vacuuming the floor after swimming will help remove this build-up. If you have a large pool, consider purchasing an automated vacuum system. Such a system will clean the entire pool within a couple of hours and can be programmed to turn on and off on a timer.
Cleaning the gutter tile
You should always clean the gutter tile on a weekly basis. If you don’t, you risk collecting pool scumline, which collects dirt and oils and forms a breeding ground for bacteria. To avoid scratching the finish, use a nonabrasive cleaner. Make sure that the cleaner you use is compatible with the chemistry of your pool’s water. It should also be free from phosphates and foaming.
Performing vacuuming weekly for pool maintenance is an essential part of pool care. It’s important to remove any debris that could clog the filter, including silt, small particles, and dirt. When it comes to vacuuming, the amount of debris you remove depends on the type of filter in your pool. A certified pool technician can tell you which filter type you have and the proper settings for the vacuum cleaner. The most common way to vacuum a pool is to use a standard setting and a filtered vacuum.
Checking water pH
The pH level of your pool water is a very important part of weekly pool maintenance. The pH level ranges from 0 to 14, with pH 7 being neutral. The ideal pH level for a swimming pool is between 7.4 and 7.6. A pH level that is too high or too low can be damaging to your pool’s components and can even cause skin irritation. Checking the pH level of your pool regularly with a pH test kit is a good idea no matter how long you’ve had it installed.
Checking chlorine levels
Depending on your usage and weather conditions, you should check the chlorine levels in your pool at least twice a week. It is advisable to test the levels of free chlorine after heavy use, especially after rainstorms. Heavy rainstorms can cause your pool’s water to become acidic, diluting the concentration of free chlorine. Therefore, it is important to check the level of chlorine in your pool as soon as possible.